Products
0-40 Levels TENS & EMS Stimulator With 4 Channels Massage For Pain Relief
Product Specification
| Model | 100D |
| Massage Material | ABS |
| Channel | 4 |
| Frequency | 1-120HZ |
| Width of Pulse | 100-250us |
| Mode | 20 |
| Strength Level | 0-40 levels |
| Power Supply | DC 3.7V Li-Polymer 4*AAA |
| Size | 135*68*26mm |
| Package | 43.5*37.5*33.5CM , 40sets /ctn ,GW: 14KG |
| Package | Main machine,manual instruction ,USB wire ,8pcs snap electrode pad ,4 tens wires |
| Certificate | FC, FDA |
Application Suggestion
1.Before use , please keep the skin clean and gently tear the PET film; After used, paste back the electrode pad to protect the service life .
2. Put the electrode wire to the electrode pad , connecting the snaps .
3. Please paste the appropriate parts according to the instructions .
4. After used , please make sure that put the PET BACK to the original electrode gel ,so that to avoid dirty.
Note: Because the conductive adhesive has strong property of sticking on material , there will be a strong adhesive force , don’t forcefully pull when tearing the PET , in order to prevent the conductive adhesive has been operated from the portable electrode paste.
Warm Tip
1. The greater the output intensity does not represent the better the effect . The most comfortable and effective when the skin feels current output 2-3 level or so.
2. In the treatment process, it is forbidden to remove the electrode portable plate of TEMS & EMS DEVICE . If you do this , you’ll have an uncomfortable current stimulation on your skin, and the correct way is to turn the device off and take portable plate off.
3. Low electrical indicator : the LCD has a battery w arning of 0 electric quantity is too low ,it can’t be turned on ,and the battery must be replaced.
Advanced raw materials , conductive electrode pad is imported from the United States , which has passed strictly bio compatibility test , as well safely applied to human skin . Conductive electrode plate can be reused . After use , taking some water or medical alcohol to wipe the surface of the gel pad gently , so that you can clean it well . Place the wiped area in the shade for a few minutes, then stick the PET back to the electrode plate after the stickiness is restored .Don’t wipe the electrode plate with any paper or cloth as it may stick to the electrode pad and cause damage and failure. The electrode pad contains moisture factor and should be stored properly , improper storage or excessive drying of the environment will affect the performance of the electrode pad .
